Re: Brake Light Switch

["Gerald A. Henry" <met57@freewwweb.com>]

My guess it maybe, but that you would be taking a chance.  The only possible
way would to make sure that there is brake fluid in the switch before
installing it.  Without that, you WILL have air in the line.  You may be
able to get away with bleeding 1 brake only.

On the other hand, have you flushed your system out with in the last 2
years?  If not, this would be the time to do it.  I know that most people in
North America don't change their fluids on a regular basis, but they ALL
should be changed at least once every 2 years.  This is one reason why the
average car lasts so much longer in Europe than it does over here.  It's
called normal looking after your car!  (Jerry will take all your old fluids
to install in his car!!!!!!!!!!!)

Gerald

----- Original Message -----
From: <SKY58@aol.com>
To: <metropolitan@listserv.azstarnet.com>
Sent: Thursday, March 23, 2000 10:05 PM
Subject: Brake Light Switch


> Can the brake light switch be replaced on the brake line without having to
> bleed the brakes afterwards?
> Jeff P
>
>