Re: Notes On Wiper Motor Repairs

[vwnate1@juno.com]

Thanx ! there was some old grease there , just a tiny bit so I re-lubed
it , I hope it doesn't get on the brushes , if so I will re-clean it out
.

 The spherical bearing is firmly held in place on both my motors by a
spring clip - it is also adjustable for armature end play externally with
a locknut , as it had about .040" I left the adjusatment alone .

-Nate 

  Lawrence  writes:
> Nate,
> 	Be advised that the spherical self-aligning bearing in the 
> wiper motor
> is by design to run "dry"  This is an oil-lite bearing.  Oil 
> impregnated
> bronze.  The oil-lite bearing is an old Henry Ford patent.
> LKG
> 
>