Re: windshield tricks

[Gerry Mikalishen <germik@uniserve.com>]

Also make sure you have the right gasket   THERE IS 2 DIFFERENT ONES   I
know cuz last summer i ordered one from Classic    and when I went to
put it in   about 3 months later   it was the wrong one    they have
different slots for the chrome    and don t cut it    just join it at
the bottom  as close together as you can get it    about center of the
window    you will probably have to put some black silicone on the joint
so it won t leak     Put the rubber on the window   and put a small rope
, cord  or something like that into the groove where it fits onto the
car    soap it up    have someone on the inside of the car pull on the
rope   slowly  to pull the rubber into the car     this takes practice
so be very very patient       it will work    good luck

Shave@aol.com wrote:

> In a message dated 04/05/2000 5:02:23 PM Central Daylight Time,
> n0nwp@inter-linc.net writes:
>
> << should I cut it and use one piece across the bottom and one around
> the top
> and sides? >>
> Hi Lynn, Do not cut the gasket. I've never done it myself but several
> people
> on the list have and I'm sure you don't cut it. The tech manual
> appears to do
> a good job of explaining how it's done. If you don't have one order it
> from
> Spencer Lewis at 1-888 MET PARTS.
> Shave