Re: Windshield Wiper Motor

[Gerry Mikalishen <germik@uniserve.com>]

Just hook it up to 12 volts on the bench,  if it doesn't work   take it
apart and see why  .. Mine didn't work   ,took it apart  cleaned it all
up  and put it back together   adjust the nut on the back carefully
and now it works  .. it has 2 bolts holding it on  ,  one is under the
hood    the other is
...........................................................under the
fender on top of the inner panel     if the antenna is out   you can see
it     otherwise  all you can do is feel for the nut      good luck

Paul Reeder wrote:

> Hi Gang!!
>
> Any suggestions on how to bench test a used wiper
> motor?  I need to replace one and I want to be sure it
> works before I install it. Any suggestions on
> maintainance work on it before installation?
>
> Thank you very much!!
>
> Happy Metting!!!!
> Paul
> MOCNA # 5747
>
> __________________________________________________
> Do You Yahoo!?
> Send instant messages & get email alerts with Yahoo! Messenger.
> http://im.yahoo.com/