Re: Windshield Wiper Motor

[vwnate1@juno.com]

Simple ;

Just get a 12 volt battery and run two wires to the motor , one to each
connector , it isn't polarity aensitive and there's no park position so
if it runs nice and smooth , you're set - be aware it should run quietly
and not get warm , nor should it draw a big spark when you connect the
wires .

 You do NOT need to gound the case ! .

I'd plan on disassembling , cleaning and lubing it in any case .

-Nate

  Paul   writes:
> 
> Any suggestions on how to bench test a used wiper
> motor?  I need to replace one and I want to be sure it
> works before I install it. Any suggestions on
> maintainance work on it before installation?
> 
> Thank you very much!!
> 
> Happy Metting!!!!
> Paul
> MOCNA # 5747
> 
> 
>