Re: Engine & trans. oil

["Gerald A. Henry" <met57@freewwweb.com>]

I wouldn't.  I'd use 10w30, or something like that in the engine, and use
the single grade in the transmission.  Your multi-weight oils of today are
so much better that any oil that was available when the Met was built, and
you might as well use the best.  A single weight oil is not as good to use
in the engine.

Gerald

----- Original Message -----
From: <SKY58@aol.com>
To: <metropolitan@listserv.azstarnet.com>
Sent: Saturday, May 27, 2000 5:57 PM
Subject: Engine & trans. oil


> The specs for engine oil above 32* is sae 40. The specs for trans. above
32*
> is sae 30
> In California is it ok to use one sae grade for both engine and trans. and
if
> so, which would it be?
> Jeff P
>
>